28 research outputs found
Preliminary results of 3D-DDTC pixel detectors for the ATLAS upgrade
3D Silicon sensors fabricated at FBK-irst with the Double-side Double Type
Column (DDTC) approach and columnar electrodes only partially etched through
p-type substrates were tested in laboratory and in a 1.35 Tesla magnetic field
with a 180GeV pion beam at CERN SPS. The substrate thickness of the sensors is
about 200um, and different column depths are available, with overlaps between
junction columns (etched from the front side) and ohmic columns (etched from
the back side) in the range from 110um to 150um. The devices under test were
bump bonded to the ATLAS Pixel readout chip (FEI3) at SELEX SI (Rome, Italy).
We report leakage current and noise measurements, results of functional tests
with Am241 gamma-ray sources, charge collection tests with Sr90 beta-source and
an overview of preliminary results from the CERN beam test.Comment: 8 pages, 8 figures, presented at RD09 - 9th International Conference
on Large Scale Applications and Radiation Hardness of Semiconductor
Detectors, 30 September - 2 October 2009, Florence, Ital
Preliminary results of 3D-DDTC pixel detectors for the ATLAS upgrade
Presented at: 9th International Conference on Large Scale Applications and Radiation Hardness of Semiconductor Detectors - RD09. Florence, Italy, 30 September - 2 October 20093D Silicon sensors fabricated at FBK-irst with the Double-side Double Type Column (DDTC) approach and columnar electrodes only partially etched through p-type substrates were tested in laboratory and in a 1.35 Tesla magnetic field with a 180GeV pion beam at CERN SPS. The substrate thickness of the sensors is about 200μm, and different column depths are available, with overlaps between junction columns (etched from the front side) and ohmic columns (etched from the back side) in the range from 110μm to 150μm. The devices under test were bump bonded to the ATLAS Pixel readout chip (FEI3) at SELEX SI (Rome, Italy). We report leakage current and noise measurements, results of functional tests with Am241 γ-ray sources, charge collection tests with Sr90 β-source and an overview of preliminary results from the CERN beam test.publishedVersio
Prototype ATLAS IBL Modules using the FE-I4A Front-End Readout Chip
The ATLAS Collaboration will upgrade its semiconductor pixel tracking
detector with a new Insertable B-layer (IBL) between the existing pixel
detector and the vacuum pipe of the Large Hadron Collider. The extreme
operating conditions at this location have necessitated the development of new
radiation hard pixel sensor technologies and a new front-end readout chip,
called the FE-I4. Planar pixel sensors and 3D pixel sensors have been
investigated to equip this new pixel layer, and prototype modules using the
FE-I4A have been fabricated and characterized using 120 GeV pions at the CERN
SPS and 4 GeV positrons at DESY, before and after module irradiation. Beam test
results are presented, including charge collection efficiency, tracking
efficiency and charge sharing.Comment: 45 pages, 30 figures, submitted to JINS
High-resolution MCP-TimePix3 imaging/timing detector for antimatter physics
We present a hybrid imaging/timing detector for force sensitive inertial measurements designed for measurements on positronium, the metastable bound state of an electron and a positron, but also suitable for applications involving other low intensity, low energy beams of neutral (antimatter)-atoms, such as antihydrogen. The performance of the prototype detector was evaluated with a tunable low energy positron beam, resulting in a spatial resolution of approximate t
Control system for ion Penning traps at the AEgIS experiment at CERN
The AEgIS experiment located at the Antiproton Decelerator at CERN aims to measure the gravitational fall of a cold antihydrogen pulsed beam. The precise observation of the antiatoms in the Earth gravitational field requires a controlled production and manipulation of antihydrogen. The neutral antimatter is obtained via a charge exchange reaction between a cold plasma of antiprotons from ELENA decelerator and a pulse of Rydberg positronium atoms. The current custom electronics designed to operate the 5 and 1 T Penning traps are going to be replaced by a control system based on the ARTIQ & Sinara open hardware and software ecosystem. This solution is present in many atomic, molecular and optical physics experiments and devices such as quantum computers. We report the status of the implementation as well as the main features of the new control system
Development of a detector for inertial sensing of positronium at AEgIS (CERN)
The primary goal of the AEgIS collaboration at CERN is to measure the gravitational acceleration on neutral antimatter. Positronium (Ps), the bound state of an electron and a positron, is a suitable candidate for a force-sensitive inertial measurement by means of deflectometry/interferometry. In order to conduct such an experiment, the impact position and time of arrival of Ps atoms at the detector must be detected simultaneously. The detection of a low-velocity Ps beam with a spatial resolution of (88 ± 5) μm was previously demonstrated [1]. Based on the methodology employed in [1] and [2], a hybrid imaging/timing detector with increased spatial resolution of about 10 μm was developed. The performance of a prototype was tested with a positron beam. The concept of the detector and first results are presented
Development of a beam imaging system for the European spallation source tuning dump
To provide essential beam diagnostics for the spallation target and for the tuning dump of the European Spallation Source (ESS) with its high-power, low-emittance proton beam, optical imaging systems have been developed allowing remote viewing of the beam profiles, using scintillation light from coatings on the proton beam window (PBW) at the accelerator exit and the target entry window (TW), and insertable interceptive screens at the tuning dump (TD).
In this paper, we present the techniques used and the main parameters in the design of the TD system, including the optical configurations modelled in the software Zemax OpticStudio (ZOS). We also present the design principles for reflective optics which can transmit high-quality images, showing the performance of the imaging systems as predicted by ZOS and by prototyping. We take account of the requirements for initial alignment and ongoing maintenance of the optical system.
Studies of the radiation and thermal environments, which impact on sensitive optical components such as cameras and mirrors, are also described, as are mechanical considerations for the vacuum vessels and screen actuators. Finally, comments are made on the applicability of similar optics to diagnostic systems at other neutron sources and accelerators